Copy Remote Controls Automatic Frequency Search Garage Door Remote Control Fixed 433 MHz for Regardless of Frequency 290-915MHz

Feature:

1.Copy Function: The copy remote control can copy most of the fixed code and learning code wireless remote controls, with fast copying speed and easy operation.
2. Scope Of Use:This intelligent copy remote control is suitable for electric bikes, balance bikes, electric doors, garage doors and other household appliances.
3. Fast Copying Speed: It adopts high performance RF chip, crystal frequency stabilisation and accurate frequency point, which can search and copy the frequency quickly, and after copying, it does not affect the original remote control.
4. High Transmission Sensitivity: The copy remote control has a long transmission distance, no direction, high transmission sensitivity, no signal blocking, can quickly realize the door opening and closing.
5. High Quality: The copy remote control is made of high quality ABS material, which is sturdy, wear-resistant and has a long service life.

Specification:

Origin: Mainland China
Use: Lighting,Electric Door
Wireless Communication: RF
Colour: red, blue (optional)
Operating frequency:full frequency (290-915MHz)
Battery type: 12V, 23A alkaline battery
Mode of operation: copy.
Housing material: ABS.
Product size: 55×37.8×16.5mm/2.16×1.48×0.64inch (including case).
Product weight: 27g (including case).
Operating voltage: DC12V
Emission current: <25mA
Static current: <0.15uA
Transmitting power: 5-7dBm
Operating temperature: -20-70°C

Operation introduction:

(1) Copy code checking operation
If the remote control has checked the code, the code can be checked only after the code is cleared. Code matching operation: press the single key of the copied remote control and the copy remote control at the same time, until the indicator light of the copy remote control changes from flash to constant light, then release the two remote control keys, and code matching is successful. Other keys are also operated in this way until all keys are copied.
(2) Clear code operation
Press and hold keys 1 and 2 of the copy remote control at the same time until the indicator light flashes quickly, and then press key 1 briefly three times to clear the code (key 2 is pressed and held all the time during this process).
(3) Recovery code operation
Press and hold the copy remote control 3 and 4 keys at the same time until the indicator light flashes quickly, and the remote control code that was cleared before can be restored.

Cautions

(1) The battery voltage should not exceed the operating voltage range.
(2) Try to keep the two remotes close together when copying the remote control, otherwise copy abnormalities will occur.
(3) The remote control distance may be reduced in an environment with high wireless interference.
(4) Keep out of reach of children.
(5) Do not use in a humid environment as this may cause damage to the remote control.

Package included

1 x 290-915 MHz Copy Remote Control (with battery)


Note:
1.We don't offer retail package,but we will pack it well before shipped out.
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you buy.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.